华为EPS100D-N02A1嵌入式电源 华为5G刀片嵌入式电源系统插框

华为EPS100D-N02A1
交直流 配电 
输入电压  AC：85V AC～300V AC，三相兼容单相  DC：-40V DC~-60V DC 输出电压  60V 端口：-57V DC～-63V DC ，默认电压-57V DC 
 48V 端口：-42V DC～-58V DC，默认电压-53.5V DC 输入频率 45Hz～66Hz 最大容量 最大支持的负载容量 6KW 其中交流输入可用：9 kW（S6050G1×3）；
直流输入 可用：6 kW（C6030G1×3） EMC 指 标 CE AC 端口：Class B， EN55032 DC 端口：Class A1，EN55032 RE Class B， EN55032 防雷 交流输入 标称放电电流：20kA，最大放电电流：40 kA；

（8/20μs） 直流输出 差模 10kA，共模 20kA，8/20μs 结构 电源系统 86.1mm×482.6mm×330mm（高×宽×深） 重量 <10kg（不含模块） 防护等级 IP20 安装方式 19 英寸机架安装，挂墙安装 维护方式 前维护 散热方式 配电自然散热，模块强制风冷

华为EPS100D-N02A1 是为 5G 产品设计的刀片直流电源系统，支持交流输入和 48V DC 输 入供电，同时具有 48V DC 和 57V DC 两种输出供电电压制式，为 5G BBU 和 RXU 提 供可靠的供电解决方案。该产品具备 57V 动态调压，市电削峰等特性，适用于 5G 扩 容或者改造场景。

华为EPS100D-N02A1 配电单元 

 交流输入：1×32A/3P（M6 OT 端子） 

 直流输入：2×100A（双 M6 OT 端子） 

 直流输出：5×33A 快插端子

华为整流模块S6050G1

双向直流转换模块（C6030G1） C6030G1 是新一代非隔离双向直流转换模块，能够支持双向输入输出,共两种工作模 式： 模式一：48V 端口输入电压范围 40V DC～60V DC、60V 端口输出电压 55V DC～72V  DC； 模式二：60V 端口输入电压范围 57V DC～72V DC、48V 端口输出电压 42V DC～58V  DC； 输出电压可以通过电源监控模块调节。该模块具有过流保护、过压保护、过热保护等 功能。

Huawei eps100d-n02a1 dual input communication power supply, Huawei 5g blade 48v150aeps100d-n02a1

EPS100D-N02A1.png

Huawei eps100d-n02a1 is a blade DC power supply system designed for 5g products, which supports AC input ａnd 48V DC input power supply, ａnd has two output power supply voltage modes of 48V DC ａnd 57V DC, providing reliable power supply solutions for 5g BBU ａnd rxu. The product has 57V dynamic voltage regulation, peak shaving ａnd other characteristics, ａnd is suitable for 5g expansion or transformation scenarios.

image.png

Huawei eps100d-n02a1 distribution unit

AC input: 1 × 32A / 3P (M6 ot terminal)

DC input: 2 × 100A (double M6 ot terminals)

DC output: 5 × 33A quick plug terminal

image.png

image.png

Huawei rectifier module s6050g1

image.png

The two-way DC conversion module (c6030g1) c6030g1 is a new generation of non isolated two-way DC conversion module, which can support two-way input ａnd output. There are two working modes: mode 1: input voltage range of 48V port: 40V dc-60v DC, output voltage range of 60V port: 55v dc-72v DC; mode 2: input voltage range of 60V port: 57V dc-72v DC, output voltage range of 48V port: 42V dc-58v DC: the output voltage can be adjusted by the power monitoring module. The module has the functions of over-current protection, over-voltage protection ａnd over temperature protection.

image.png

AC / DC distribution input voltage  AC: 85V AC ~ 300V AC, three-phase compatible single-phase  DC: - 40V DC ~ - 60V DC output voltage  60V port: - 57V DC ~ - 63v DC, default voltage - 57V DC  48V port: - 42V DC ~ - 58V DC, default voltage - 53.5v DC input frequency 45Hz ~ 66hz, maximum capacity supported 6kW, of which AC input is available: 9 KW (s6050g1 × 3); DC input available: 6 kW (c6030g1 × 3) EMC index CE AC port: Class B, en55032 DC port: class A1, en55032 re class B, en55032 lightning protection AC input nominal discharge current: 20KA, maximum discharge current: 40 Ka;

(8 / 20 μ s) DC output differential mode 10kA, common mode 20KA, 8 / 20 μ s structure power supply system 86.1mm × 482.6MM × 330mm (H × w × d) weight < 10kg (excluding module) protection grade IP20 installation mode 19 inch rack installation, maintenance cooling mode before wall mounted installation ａnd maintenance mode power distribution natural cooling, module forced air cooling